EP-2010 (reverse) optical projector

1. Technical parameters of EP-2010 back projection instrument

• Machine stroke (X, Y): 200 mm×100 mm×90mm
• Resolution: 0.0001mm
• X, Y axis linear accuracy: U=±( 3+L/100 )μm
• Repeatability: ±0.002 mm
• Projection screen size: Φ300mm (with a rice character line)
• Projection rotation range: 0～360°
• Rotation angle resolution: 0.01°/1'
• Stage size: 350 mm×170 mm
• Glass table size: 225 mm×120 mm
• Carrying weight: 10 kg
• Workpiece height limit: 75mm
• Objective lens: 10×, 20×, 50X (including half-reflection lens) choose one
• Focal length: 75mm
• Illumination system: both transmissive and semi-reflective are parallel light, the light source is 24V, 150W halogen tungsten lamp.
• Transmission mode: polished rod transmission + double guide rail
• Operation mode: X, Y handwheel + fast traverse Z handwheel
• Data output: digital display, micro printer printing
• Overall dimensions of the host: 810 mm×780 mm×1100 mm
• Overall dimensions of the whole machine: 810 mm×780 mm×1750 mm
• Total weight of the instrument: 150 kg
• Power supply: AC 220±10V/110±10V, 50/60Hz
• Power: max.400W

2. Picture introduction of EP-2010 reverse projection instrument

               High-thrust friction drive system                                           High precision linear guide

High stability body base

3. Technical information provided by Yixin
Provide users with the following materials during equipment installation and commissioning:
1. 1 set of original manual
2. Image processing operation manual 1 set
3. 1 set of inspection certificate and qualification certificate when the equipment leaves the factory
4. Equipment packing list 1 set
4. Product design and manufacturing meet the following standards
  Comply with EP-2010 optical projector standard.
5. equipment use environmental conditions and working hours
1. Use environment: temperature 20±3 ℃
2. The relative humidity of the environment: 35%-65%
3. Power supply: AC 220±5V, 50Hz.
6. equipment acceptance, inventory and installation commissioning test acceptance
1. Acceptance of equipment
The acceptance of equipment is divided into two stages, namely: inventory acceptance and final acceptance. The method of acceptance shall be carried out in accordance with the technical agreement reached by both parties.
1) Inventory and acceptance
⑴ When the equipment arrives at the place of delivery, the supplier and the buyer will immediately organize the acceptance personnel of both parties to continuously check and accept the contract equipment according to the contract equipment supply list and equipment packing list until the inventory is completed.
⑵ If the counted number is inconsistent with the contract equipment supply list and equipment packing list or the contract equipment is damaged, the supplier shall make up or replace it within the time agreed by both parties, and all costs incurred shall be borne by the supplier.
⑶ After the two parties confirm that the contract equipment has passed the inspection and acceptance, the two parties will jointly sign the "Inventory and Acceptance Report".
2) Installation, adjustment, test and acceptance
The supplier is responsible for completing the installation and commissioning of the equipment at the buyer's site free of charge. For installation at the buyer’s site, the buyer should prepare in advance the infrastructure such as gas, electricity, and grounding protection, and notify the supplier by fax. If there is any problem, communicate in advance to ensure a smooth installation.
The company is responsible for the installation and commissioning of the measuring machine. All packaging boxes can only be opened under the supervision and approval of the engineer. According to needs, users need to provide internal disassembly, transportation and in-place support. The final acceptance will be carried out according to Yixin Enterprise Standard Q/YX 04-2004.
After the commissioning is completed, the equipment shall be checked and accepted, and the acceptance of the equipment shall be carried out according to the technical agreement reached by the two parties. Various technical indicators shall be implemented in accordance with the contents of the "Technical Agreement" signed by both parties. After the acceptance is completed, both parties shall jointly confirm, and the representatives of both parties shall sign the "Installation and Commissioning Test Acceptance Report".
7. personnel training
This course aims to provide basic training on equipment introduction, operating procedures, and common sense of measurement for operators of measuring machine systems. Participants in the training generally require basic knowledge of measurement and computer knowledge. The training time is generally 2-3 days, with 2 participants. The training location is at the company training center or user site.
Personnel training is carried out at the same time as the equipment installation, commissioning and acceptance and handover. The number of personnel participating in the training is determined by the demander.
8. Quality assurance and after-sales service
1. Since the equipment installation and commissioning is completed, the two parties sign the "Installation and Commissioning Test Acceptance Report" as the beginning of the equipment quality assurance period. The supplier guarantees the equipment for 12 months and implements lifetime maintenance services for the equipment. The relevant expenses during the equipment warranty period shall be borne by the supplier, and the relevant expenses outside the equipment warranty period shall be borne by the supplier only for materials and travel expenses. After the warranty period expires, the supplier will provide long-term technical support and spare parts supply to the buyer.
2. The imported components are guaranteed to be brand new imported products with original original packaging, and all domestic components adopt high-quality standard components produced by designated national manufacturers.
3. After the equipment is put into normal operation, the supplier will still provide all necessary technical consultation, technical services and technical training for the demander at any time.
4. During the use of the equipment, if there is a problem that the buyer cannot solve by itself, the supplier will reply and propose a solution within 2 hours upon receiving the request from the buyer. If the problem still cannot be solved, the supplier guarantees that it will be in 2 Send someone to the buyer's site within working days.
5. Six months after the equipment has been put into normal operation, the supplier shall send personnel for the first return visit to the buyer to check the operating status of the equipment and discuss the technical issues in the use of the equipment with the buyer.
6. The company has established CRM/K3 customer relationship management system software, customer information collection, analysis, processing, feedback, and tracking to "customer satisfaction" pre-sales, sales, and after-sales quick response system. Ensure to respond to customer needs, opinions, suggestions, complaints, and complaints in the shortest time.
9. packaging and transportation
Use good wooden box packaging and road transportation to ensure good equipment. The packaging and transportation process issues shall be borne by the supplier.
After the goods arrive at the buyer, the supplier’s personnel will arrive at the buyer’s site within 3 working days to unpack and inspect the goods and install and debug the equipment.
10. List of equipment spare parts
System configuration schedule